Features:
1.Integrated flat bed base, separate rear and side mounted coolant tank ensures fluent chip disposal and easy chip removal, convenient for users to choose.
2.90¡ãbed saddle structure is convenient to install power tool unit and comb type tool on Y-axis slide plate.
3.The cartridge type spindle is supported by imported angular contact ball bearings. It has been balanced dynamically and rotates smoothly at high speed.
4.P-class precision ball screw guideway and C3-class intermediate pretension screw improve the total rigidity and high precision of lathe.
5.The Integrated power unit operate turning, drilling, tapping and milling easily, composite milling-turning can be preformed.
6.The machine is suitable for efficient turning of large batch of small type work pieces in instrument, electronic connector and aerospace.
Standard equipment:
Control system: GSK988TA spindle servo system
Main motor: GSK spindle servo motor
Feed motor : GSK servo motor
Motor of revolving tool: GSK servo motor
Spindle bearing: Imported P4-class angular contact ball bearing
Screw bearing: Supporting bearing
Guideway: P-class precision ball screw from Taiwan
Screw: C3-class precision ball screw from Taiwan
Chuck:45-type hydraulic draw down collet chuck
Cylinder: 6¡±hollow hydraulic rotating cylinder from Taiwan
Tool block: Comb type tool post
Power head: 4+4 integrated power head
Hydraulic station: high performance hydraulic station, oil pump motor assembly from Taiwan
Heat exchange: Famous brand
Guard: Full enclosed guard
Technical data
| Item | unit | CKV45 |
| Capacity | Max. swing dia. over bed | mm | §¶500 |
| Max. swing over slide | mm | §¶280 |
| Max. milling dia. | mm | §¶360 |
| Max. turning dia. | mm | §¶90 |
| Max. machining length | mm | 320 |
| Min. machining length | mm | 100 |
| Max. bar dia. to be held | mm | §¶45 |
| Spindle | Type of spindle head | | A2-5 |
| Tape of spindle bore | | MT No.6 |
| Spindle thru-hole | mm | §¶57 |
| Max. spindle speed | r/min | 4500 |
| Feed | Movement distance X/Z/Y | mm | 220/320/510 |
| Rapid traverse X/Z/Y | m/min | 20/20/25 |
| Turret | Type of turret | | Comb type tool |
| Capacity of tool post | pcs. | 10 |
| Tool section: turning/boring | mm | 20×20/¦µ25 |
| Revolving tool | Type of revolving tool | | ER20 |
| Type of revolving tool | pcs. | 8 Axial:4;radial:4 |
| Max. Rotating speed of speed | rpm | 3500 |
| Max. dia. of drill bit to mount | mm | §¶13 |
| Max. drilling dia. | mm | §¶10 |
| Max. Tapping dia, | mm | M8 |
| Max. Dia. of milling tool | mm | §¶10 |
| Tailstock | Dia./travel of quill | mm | §¶60/100 |
| Type of quill bore | | MT No.4 |
| Type of sleeve drive | | Hydraulic |
| Movement of tail stock | | Manual operation |
| Motor | Power of main motor | kW | 5.5/7.5£¨servo£© |
| Rated torque of main motor | Nm | 35 |
| Torque of servo motor X/Z/Y | Nm | 15/15/10 |
| Power of hydraulic motor | kW | 1.5 |
| Power of coolant pump motor | W | 370 |
| Others | Control system | | GSK988TA(spindle servo) |
| Power capacity | kVA | 20 |
| Type of guideway | | Precision linear ball screw guideway |
| Dimension of machine(LxWxH) | mm | 2373×1927×2383 |
| Dimension of package box(LxWxH) | mm | 2792×2389×2963 |
| Net/gross weight of machine | Kg | 3500/3900 |